Evolving out of the Sporting Handgun™ line, with deep skives to the nose and mouth of the copper jacket, these skives have enhanced the expansion characteristics of the ASP™ bullet without sacrificing the accuracy and reliable feeding that the Sporting Handgun™ line has been known for. The skives in the jacket mouth create precise reliefs in the jacket which allow for rapid, consistent, reliable expansion. This reliable expansion assures energy transfer and stopping power while limiting the likelihood of over-penetration. Equally at home on duty or in a defensive role, Law Enforcement professionals and civilians alike can rest assured that the ASP™ bullet will perform when needed.

1. Skived bullet jacket engineered for reliable expansion at a range of impact
velocities

2. Controlled expansion and penetration for effective energy transfer

3. Jacket mouth designed for smooth, reliable feeding

4. Consistent performance and accuracy

Nosler’s Bonded Solid Base® bullet line-up is comprised of .22-64 grain, and .308-168 grain offerings due to consumer demand for a projectile that offers controlled expansion, high weight retention and deep penetration but optimized for use in AR platform rifles.

The Bonded Solid Base® bullet features a Protected Point design for reliable feeding in both bolt action and semi-automatic rifles.

The tapered jacket ensures controlled expansion while the proprietary bonding process prevents fragmentation and guarantees high weight retention. The AccuBond® bonding process welds the copper jacket to the lead core to virtually eliminate the possibility of core/jacket separation. Solid Base® construction supports the mushroom for wide wound channels and deep, barrier blind penetration.

1. Protected Point Design: Ensures reliable feeding in both bolt action and semi-automatic platforms.

2. AccuBond® Bonding Process: Welds the copper jacket to the lead core to
prevent core/jacket separation for maximized weight retention.

3. Well-Dened Cannelure: Permits a tight crimp that eliminates bullet
movement within the case during recoil, ensuring reliable feeding in semi-automatic ries.

4. Solid Base®: Solid Base® construction ensures straight-line penetration.

Based on the proven performance of the Accubond bullet, the Bonded Defense bullet oers superior barrier penetration with uncompromising expansion and terminal performance. Through an exclusive bonding process that eliminates voids in the bullets core Bonded Defense couples Nosler’s proven copper-alloy jacket with its special lead-alloy core. The result is a bullet that provides match-grade accuracy with excellent weight retention through barriers and ght stopping performance on target. The Nosler solid base acts as a platform for large diameter mushrooms.

The signature Green Radiographic tip resists deformation,increases ballistic coecient, improves aerodynamics and initiate expansion upon impact. Unlike standard plastic tips the radiographic tip also shows up on x-rays improving lifesaving eorts post engagement.

1. Signature Green Radiographic Tip Assures smooth, accurate, ght stopping performance with lifesaving x-ray detection.

2. Tapered Copper-Alloy Jacket: Lethal penetration and uniform expansion
with maximum weight-retention and minimal barrel fouling.

3. Lead-Alloy Core: Engineered for balanced expansion.

4. Proprietary Bonding Process: Eliminates all possibility of component separation.

5. Boat-Tail Design: Boat-tail conguration combines with the streamlined polymer tip for long-range performance and for easier loading.

Based on the AccuBond® -Long Range (LR) bullet the Bonded Defense®-Long Range bullet line was  eveloped in response to the escalating demand from precision shooters who were asking for a bullet that could keep up with today’s level of high-grade optics and ultra-high velocity cartridges in order to stretch practical shooting distances past 1,000 yards; yet still. In order to accommodate these extreme parameters, the Bonded Defense®-LR bullet was designed to have a minimum impact velocity of 1300fps in order to reliably expand or mushroom at those much longer distances, compared to the 1800fps minimum impact velocity of all other Nosler® bullets. Now what about close-range performance? Because the lead core is bonded to the copper jacket, the Bonded Defense®-LR bullet will hold up to extreme velocities. To further assist performance at such a wide range of impact velocities, the copper jacket is tapered, meaning it is thin at the nose, becoming much thicker towards the boat-tail base.

The signature Green Radiographic tip resists deformation, increases ballistic coecient, improves aerodynamics and initiate expansion upon impact. Unlike standard plastic tips the radiographic tip also shows up on x-rays improving lifesaving eorts post engagement.

1. Signature Green Radiographic Tip Assures smooth, accurate, ght stopping performance with lifesaving x-ray detection.

2. Bonded Performance: Bonded for maximum weight retention and energy transfer

3. Tangent Ogive: Promotes smooth feeding and consistent seating depths

4. Reliable expansion: Reliable expansion across the widest range of velocities of any Nosler hunting bullet

5. High-performance boat-tail: Enhanced boat-tail for maximized B.C. and increased weight retention

The more you hunt, the more you start to realize how unpredictable and unforgiving nature can be, which is why we engineered the Ballistic Tip® Hunting bullet to be very  redictable and extremely forgiving. Whether you’re after whitetails, blacktails, mulies or pronghorns, Ballistic Tip® bullets deliver the kind of accuracy, consistency and down-range punch required for putting down that buck in any situation. The combination of performance and versatility that Nosler® has built into these bullets has resulted in over 30 years of successful hunts for sportsmen across the country – and around the world.

These bullets deliver the accuracy, consistency and down-range punch required for clean kills in all situations. These at-shooting, wind-defying bullets utilize ballistic-designed boat-tails and polymer tips to increase long-range eciency and protect against tip damage in the magazine. Unique tapered jacket provides controlled expansion at all practical ranges and velocities.

1. Nosler Ballistic Tip®: Streamlined polymer tip, color-coded by caliber, resists deformation in the magazine and initiates expansion upon impact.

2. Fully-Tapered Jacket and Special Lead-Alloy Core: Allows controlled expansion and optimum weight retention at all practical velocity levels. The heavy jacketed base prevents bullet deformation during ring.

3. Heavy Jacketed Base: Acts as a platform for large-diameter mushroom.

4. Ballistically Engineered Solid Base®: Boat tail conguration combines with the streamlined polymer tip for extreme long-range performance and for easier loading.

Varmageddon bullets are made with a lead-alloy core and feature a copper-alloy jacket designed to withstand high velocities yet expand immediately upon impact. Varmageddon bullets are manufactured using a highly ecient process, providing legendary Nosler quality and accuracy at an economical price.

1. Metallic Black Polymer Tip: Nestled in the jacket mouth is the streamlined polymer tip.

2. Ultra-Thin Jacket Mouth: Assures violent expansion at either end of the velocity scale.

3. Varmint Jacket Wall Design: The uniform, gradual thickening at the bullet’s mid-section is designed to keep the Varmageddon® together until impact-at any velocity.

4. Flat Base: Bench rest accuracy out of a varmint bullet.

For those wanting to squeeze the most performance from their competition rifle, Nosler’s  new RDF (Reduced Drag Factor) match bullet line is the ideal choice. 

Nosler’s RDF line was designed from the ground up to provide exceptionally high BCs, which create the flattest trajectory and least wind drift possible. The keys to the RDF’s outstanding performance are Nosler’s meticulously optimized compound ogive and long, drag reducing boattail, which make handloading a snap and create an incredibly sleek form factor.  RDF bullets also have the smallest, most consistent meplats of any hollow point match bullet line, so there is no need to point or trim tips. 

Highest B.C.’s, smallest meplat, tighter groups – Nosler RDF.  

1. Very Small Meplat -No trimming or Pointing required

2. Compound ogive is insensitive to seating depth

3. High BC for flatter trajectory and reduced wind drift

Nosler® has blended the accuracy of its Custom Competition® bullet jackets with its own ultra-precise, lead-alloy cores to create the performance standard for match rifle bullets. The hollow point provides a small meplat for reduced drag and increased aerodynamic efficiency while the pronounced boat-tail design provides efficient flight characteristics over a wide range of velocities.

1.  Hollow Point: Provides small meplat for reduced drag and increased aerodynamic efficiency.

2.  Custom Quality Jacket: Engineered to exhibit unmatched accuracy.

3.  Form-Fitted, Lead-Alloy Core: For maximum bullet stability and balance.

4.  Pronounced Boat-Tail Design: Provides excellent flight characteristics over a range of velocities.